MOZA Air 2S introduces the non-stop operation concept with the smart micro handwheel along with the most powerful DSLR gimbal battery with up to 20 hours of run-time to create the ultimate performance gimbal for filmmakers and videographers.
- Smart Micro HandWheel
- MOZA Spark Power Supply System 3.0
- Powerful Extensions Arsenal
- One-step Balancing
- Three-Axis Lock Design
- Superior Built Quality
Shipping and Delivery
- Estimated dispatch within 3 days
- 14 Days Return & Refund Service
|Tilt Camera Tray Dimension||100 mm|
|Roll Camera Tray Dimension||110 mm|
|Pan Mechanical Endpoint Range||360°|
|Roll Mechanical Endpoint Range||
+240 ~ -100
|Tilt Mechanical Endpoint Range||
+180 ~ -95
|Battery Type||4S1P LG INR18650|
|Battery Capacity||3200 mAh|
|Camera Control Port||Mini USB 5V 1A|
|Camera Power Supply Port||2mm DC 7.8V|
|Peripherals Power Supply Port||DC5521 16.8V|
||Quick-acting charging is available
|Q: Moza Air 2S Specifications|
|Air 2S: Payload Ran Minimum Payload 1.1 lbs (500g) Maximum Payload 9.25 lbs (4200g) Air 2S: Camera Tray Dimensions Roll to release center 110 Til... View More>>|
|Q: Why can't my MOZA Air 2S search for the Bluetooth model in the App, nor can I search for it on my mobile phone?|
|1. Please search and connect in the Master App instead of in the Bluetooth menu of the phone settings. 2. Use other systems or brands of mobile phones to t...|
|Q: Why does MOZA Air 2S display illegal data after setting a delay in the APP？|
|Maybe your time parameters and points are set incorrectly or not set, please refer to the document for detailed setting steps.|
|Q: Why is my MOZA Air 2S unable to connect Bluetooth but I can search for it in the APP?|
|1. Confirm that the application you downloaded is correct, and make sure it is Master instead of Genie or Assistant. 2. Whether the app permission is turned...|
|Q: Why does my MOZA Air 2S fail to charge and the indicator light does not flash？|
|1. Check whether the charging cable is normal and replace other Type-C charging cables. 2. When the battery is full, the 5 indicators are constant, check t...|
|Q: Why does my MOZA Air 2S display an error code？|
|If the error code is OCOO, it can be solved by calibration. If it is other, it is all caused by the broken circuit or short circuit and needs to be sent b...|
|Q: Why can't my Air 2S return to normal after the centering operation?|
|Please switch the following mode to initial.|
|Q: Can I use this moza air 2s to power blackmagic just like the formal air 2?|
|Yes. It can.|
|Q: Why does the motor of MOZA Air 2S have abnormal noise?|
|1. Make sure it has been leveled. If not, do the leveling operation first. 2. Reduce the output of the motor until it is suitable (it is recommended to red...|
|Q: Why doesn't my MOZA Air 2S start when I press the power button for a long time?|
|1. Whether the battery can start normally. 2. If you cannot start, try to press the Reset button. 3. The battery is broken, send it back for repair.|
|Q: Why does my MOZA Air 2S button not work?|
|1. please upgrade the Firmware. 2. Button failure. Please send it back for repair.|
|Q. How can I update the firmware?|
|Upgrade via computer:
a.Turn off the gimbal.
b.Hold the Menu button and do not release, then press the power button with the other hand until the prompt ‘Boot Mode’ appears on the screen.
c. Connect the gimbal to the computer with a USB Type-C cable.
d.The software will automatically identify the device and load the firmware. Press the ‘Upgrade’ button and wait for about 30s. Firmware Upgrade Management 20 Specifications Payload Range 0.3kg~4.2kg Dimension 478*206*184mm(W*D*H) Tilt Camera Tray Dimension 110 mm Roll Camera Tray Dimension 100 mm Pan Mechanical Endpoint Range 360° Roll Mechanical Endpoint Range -100°~+200° Tilt Mechanical Endpoint Range -190°~+110° Battery Type 4S1P LG INR18650 Battery Capacity 3000 mAh Working Voltage 15.2V Static Current 150mA BT5.0 BLE 2.4G USB Camera Control Port Mini USB 5V 1A Dummy Battery Port DC2.0mm 7.8V 1A Accessory Power Supply Port DC5.5mm 12V 2A TYPE-C Port Temperature 0--50°C Quick-acting charging is available Communication Air 2S.
e.Restart the gimbal after the upgrade.
Upgrade via App:
a. Turn off the gimbal.
b. Hold the Menu button and do not release, then press the power button with your other hand until the prompt “Boot Mode” appears on the screen.
c. Start App, press Bluetooth to search for Air 2S device and connect.
d. The App will automatically enter the firmware upgrade interface, please wait for the firmware download to complete, press the ‘upgrade’ button and wait for about 5 minutes.
e. During the upgrade process, ‘upgrading' will be displayed on the gimbal screen, and' upgrade success' will be displayed on the screen after the upgrade is completed, and then Air 2S can be restarted.
|Q. How to restore to Default Settings?|
|Use the MOZA Master App under Configuration and select ‘Set Default’. Or from the gimbals handle configuration.|
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.